Quick answer
GHK-Cu is the copper(II) complex of the tripeptide glycyl-L-histidyl-L-lysine (Gly-His-Lys). The free peptide weighs roughly 340 g/mol and the copper complex about 400 g/mol. Published structural work shows copper held by the N-terminal amine, a backbone amide nitrogen and the histidine imidazole, and calorimetry puts the conditional dissociation constant at about 7 × 10−14 M at pH 7.4, so the metal is held very tightly. The complex gives solutions a blue tint, which makes color a rough visual check, not a purity test. For laboratory research use only; not for human consumption.
Search results for GHK-Cu tend to start with biology and skip the part that determines how the material behaves in a tube: its chemistry. This explainer starts at the molecule. It covers what the tripeptide is, how it binds copper, what published structural and thermodynamic studies measured, how that shapes handling, and what a laboratory should look for in analytical documentation. It is a reference for people who work with the reagent, not a guide to use in people. The research material itself is on the GHK-Cu product page, and the broader biology is in the GHK-Cu research overview.
The tripeptide and its history
GHK is glycyl-L-histidyl-L-lysine: three residues, a free N-terminal amine on glycine, an imidazole side chain on histidine and a primary amine side chain on lysine. It was reported in 1973 by Pickart and Thaler as a factor in human serum that prolonged the survival of normal liver cells in culture (Pickart and Thaler, 1973). A later review describes it as an activity in human albumin that made old human liver tissue synthesize proteins like younger tissue, and notes that the peptide has high affinity for copper ions and readily forms the copper complex GHK-Cu (Pickart and colleagues, 2012).
The same sequence occurs inside a larger protein: the alpha-2(I) chain of type I collagen contains a GHK triplet, which led Maquart and colleagues to propose that the tripeptide might be released by proteases at a wound site (Maquart and colleagues, 1988). That origin story is why GHK-Cu is classed as a naturally occurring peptide, in contrast to engineered analogues.
How copper is held
The interesting chemistry is the metal center. Hureau and colleagues solved X-ray structures of Cu(II)-GHK and used EPR, XAS and NMR to examine it in solution. In the solid state the complex is a dimer; in solution it is a monomer in which copper is bound by three nitrogen ligands, the N-terminal amine, an amidyl nitrogen from the peptide backbone and the imidazole of histidine, with a fourth equatorial site occupied by a labile oxygen from a carboxylate (Hureau and colleagues, 2011).
Trapaidze and colleagues used isothermal titration calorimetry with glycine as a weaker competing ligand to measure binding. GHK bound Cu(II) predominantly 1:1, with a conditional dissociation constant of 7.0 ± 1.0 × 10−14 M at pH 7.4 (Trapaidze and colleagues, 2012). A constant that small means the copper stays on the peptide in ordinary buffers, but it is a conditional value that depends on pH and on competing ligands, so it does not make the complex immune to strong chelators or to harsh chemistry.
| Feature | What was measured | Why it matters at the bench |
|---|---|---|
| Stoichiometry | Mostly 1:1 peptide to Cu(II) (ITC) | One metal per peptide; calculate on the complex mass when comparing to the vial label |
| Coordination | N-terminal amine, amidyl N, imidazole N, plus a labile oxygen (X-ray, EPR, NMR) | Loss of any ligand changes color and redox behavior |
| Affinity | Conditional Kd about 7 × 10−14 M at pH 7.4 | Very tight in simple buffers; competing chelators or low pH can still strip copper |
| Solid state | Dimeric | Lyophilized cake and solution are different species |
| Solution | Monomeric, blue | Color provides a rough visual indicator of intact copper binding |
Free peptide, copper salt and complex are different reagents
The literature does not regard them as interchangeable. In dermal fibroblasts, GHK-Cu raised matrix metalloproteinase-2 secretion; the effect was reproduced by copper ions but not by GHK alone (Siméon and colleagues, 2000). In a separate fibroblast assay, GGH, GHK, CuCl2 and their copper complexes all lowered TNF-alpha-dependent IL-6 secretion (Gruchlik and colleagues, 2012). These two abstracts point in different directions on whether the peptide or the metal carries the effect, and the honest reading is that it depends on the endpoint. For an experiment, that means the controls matter: free GHK, copper salt at matched copper concentration, and the complex, each in the same medium.
| Reagent | Contains | Typical control purpose |
|---|---|---|
| GHK-Cu | Peptide and Cu(II) together | The test article |
| GHK (no copper) | Peptide only | Separates peptide effect from copper effect |
| CuCl2 or CuSO4 | Copper only, at matched concentration | Tests whether the metal alone reproduces the result |
| Scrambled or unrelated tripeptide with copper | Copper bound to another chelating motif | Tests whether the GHK sequence is specific |
| Vehicle | Diluent only | Baseline |
What the chemistry means for handling
- Color. A clear blue solution is expected. Loss of blue, haze or a shift toward green or brown suggests copper displacement, reduction or precipitation and the stock should be set aside. Color says nothing about peptide purity.
- Buffers and chelators. Phosphate can precipitate copper, and EDTA, citrate-type chelators and some biological buffers compete for it. Avoid them for stock preparation or test their effect first.
- Reducing agents. Ascorbate, DTT and similar agents can reduce Cu(II) and change the species under study. Hureau and colleagues examined how structure influences the redox properties of the complex (Hureau and colleagues, 2011).
- Oxidation. Histidine is an oxidation-prone residue, and metal-catalyzed oxidation is a recognized route for protein and peptide damage (Stadtman and Levine, 2003). Keep the reconstituted stock cold, dark and with minimal headspace exposure.
- Storage. The product page states refrigeration at 2–8 °C, with −20 °C for long-term storage, protected from heat, moisture and light.
Stock preparation arithmetic is formula-based: concentration in mg/mL is vial mass in mg divided by diluent volume in mL, and the reconstitution calculator performs it for the 50 mg and 100 mg sizes. A diluent-specific walkthrough is in how to reconstitute a lyophilized peptide, and the broader bacteriostatic-water case is in bacteriostatic water explained.
Reading an identity and purity record for a copper peptide
A certificate for GHK-Cu has to answer more questions than one for a metal-free peptide. The product page lists identity and sequence confirmation, HPLC purity of at least 98%, lot number, test date and supplied form. A careful reader also looks for the points below.
| Check | What to look for | Limit of the check |
|---|---|---|
| HPLC trace | Main peak share, retention time, absence of large side peaks | Purity of the chromatographic signal, not copper content |
| Mass confirmation | Mass matching the peptide (about 340) and, where run, the copper complex | Different ionization modes can show free peptide or the complex |
| Copper content | A stated assay (for example ICP) where the lot reports it | Not always part of a standard certificate |
| Lot and date | Matches the vial label | Confirms traceability only |
| Appearance | Pale blue lyophilized cake, clear blue solution | A visual screen |
For how to read each field, see how to read a COA, understanding HPLC purity and GHK-Cu purity testing. The lot-specific record for the 100 mg vial is on the COA page.
What GHK-Cu is used for in the laboratory
The product page lists three research applications: collagen-synthesis models, dermal-remodeling studies and gene-expression research. The primary papers behind those headings are in vitro and animal work. In fibroblast cultures, collagen synthesis rose from a threshold between 10−12 and 10−11 M, peaked at 10−9 M and was independent of cell number (Maquart and colleagues, 1988). In dermal fibroblasts, GHK-Cu increased MMP-2 and the tissue inhibitors TIMP-1 and TIMP-2, which the authors read as remodeling of the matrix and not only production of it (Siméon and colleagues, 2000). A review of gene-expression data from the same research line describes regulation of many genes by GHK (Pickart and Margolina, 2018). These are the claims a laboratory can test, and the further detail on wound-related assays is in the companion article on GHK-Cu wound-healing assays. Because each of these reports used a specific cell type, medium and exposure time, a reader should state those same conditions when reproducing a result. For how GHK-Cu differs from other copper peptides, see GHK-Cu vs other copper peptides.
Limits of what is known
The structural and thermodynamic papers describe the complex in simplified solutions. Behavior in culture medium, which contains albumin, amino acids and other copper binders, will differ. Several biological reports come from one research line, and the reviews that summarize them should be read alongside the primary data. The abstracts cited here describe cell, animal and physical-chemistry work only, and the physical-chemistry data come from simplified model solutions, so they bound what can be said about complex media, and nothing in this article is a statement about effects in people.
Related reading
- GHK-Cu research overview
- GHK-Cu peptide explained
- GHK-Cu vs other copper peptides
- GHK-Cu purity testing
- Where to buy GHK-Cu for research
- Research peptide catalog
Frequently asked questions
What is GHK-Cu?
It is the copper(II) complex of the tripeptide glycyl-L-histidyl-L-lysine, a naturally occurring sequence first reported in human serum in 1973. It is sold as a research reagent.
How much does GHK-Cu weigh?
The free tripeptide is roughly 340 g/mol and the copper complex about 400 g/mol. Use the mass of the species you are actually calculating from.
How tightly does GHK bind copper?
Isothermal titration calorimetry gave a conditional dissociation constant of about 7 × 10^-14 M at pH 7.4, a very tight 1:1 interaction under those conditions.
Why is GHK-Cu blue?
The Cu(II) ion coordinated by the peptide absorbs light in a way that gives solutions a blue tint. Loss of the color can indicate that copper is no longer bound as expected.
Does the copper or the peptide produce the biological effects?
It depends on the endpoint. In one fibroblast study MMP-2 stimulation was reproduced by copper ions but not by GHK alone, while in another both peptides and copper salt lowered IL-6 secretion. Controls with free GHK and a copper salt are needed.
Can GHK-Cu be made in any buffer?
Not safely. Phosphate, chelators such as EDTA and reducing agents can precipitate, strip or reduce the copper. Water or a diluent without those components is the simpler choice.
How should GHK-Cu be stored?
The product page states 2–8 °C, or −20 °C for long-term storage, protected from heat, moisture and light.
Is this article about use in people?
No. GHK-Cu is supplied for laboratory research use only, and the studies cited describe cells and animals.
Related reading: GHK-Cu Wound Healing Research: Assays and Readouts, Collagen and Wound Closure Assays: GHK-Cu, TB-500, Copper Peptide Handling Mistakes and How to Avoid Them.
References
- Pickart L, Thaler MM. Tripeptide in human serum which prolongs survival of normal liver cells and stimulates growth in neoplastic liver cells. Nat New Biol. 1973;243(124):85-87. PMID:4349963
- Pickart L, Vasquez-Soltero JM, Margolina A. The human tripeptide GHK-Cu in prevention of oxidative stress and degenerative conditions of aging: implications for cognitive health. Oxid Med Cell Longev. 2012;2012:324832. doi:10.1155/2012/324832
- Maquart FX, Pickart L, Laurent M, Gillery P, Monboisse JC, Borel JP. Stimulation of collagen synthesis in fibroblast cultures by the tripeptide-copper complex glycyl-L-histidyl-L-lysine-Cu2+. FEBS Lett. 1988;238(2):343-6. doi:10.1016/0014-5793(88)80509-x
- Hureau C, Eury H, Guillot R, Bijani C, Sayen S, Solari PL, et al.. X-ray and solution structures of Cu(II) GHK and Cu(II) DAHK complexes: influence on their redox properties. Chemistry. 2011;17(36):10151-60. doi:10.1002/chem.201100751
- Trapaidze A, Hureau C, Bal W, Winterhalter M, Faller P. Thermodynamic study of Cu2+ binding to the DAHK and GHK peptides by isothermal titration calorimetry (ITC) with the weaker competitor glycine. J Biol Inorg Chem. 2012;17(1):37-47. doi:10.1007/s00775-011-0824-5
- Siméon A, Emonard H, Hornebeck W, Maquart FX. The tripeptide-copper complex glycyl-L-histidyl-L-lysine-Cu2+ stimulates matrix metalloproteinase-2 expression by fibroblast cultures. Life Sci. 2000;67(18):2257-65. doi:10.1016/s0024-3205(00)00803-1
- Gruchlik A, Jurzak M, Chodurek E, Dzierzewicz Z. Effect of Gly-Gly-His, Gly-His-Lys and their copper complexes on TNF-alpha-dependent IL-6 secretion in normal human dermal fibroblasts. Acta Pol Pharm. 2012;69(6):1303-6. PMID:23285694
- Stadtman ER, Levine RL. Free radical-mediated oxidation of free amino acids and amino acid residues in proteins. Amino Acids. 2003;25(3-4):207-18. doi:10.1007/s00726-003-0011-2
- Pickart L, Margolina A. Regenerative and protective actions of the GHK-Cu peptide in the light of the new gene data. Int J Mol Sci. 2018;19(7):1987. doi:10.3390/ijms19071987
