V8 Peptides — Engineered Performance
Research Library
Selank Structure and Sequence: Tuftsin Plus Pro-Gly-Pro
SelankChemistry

Selank Structure and Sequence: Tuftsin Plus Pro-Gly-Pro

V8 Peptides Research TeamUpdated

Compiled from peer-reviewed literature and manufacturer analytical data for laboratory research reference.

Quick answer

What is the structure of Selank? Selank is a linear heptapeptide with the sequence Thr-Lys-Pro-Arg-Pro-Gly-Pro. Its first four residues are tuftsin (Thr-Lys-Pro-Arg), a natural phagocytosis-stimulating peptide described in 1970, and its last three are a Pro-Gly-Pro extension. The V8 product page lists the molecular formula C33H57N11O9, giving a monoisotopic-scale mass near 751-752 Da. The sequence is short, proline-rich and has no disulfide bonds, which shapes how it is characterized and handled. Supplied for laboratory research use only.

The sequence, residue by residue

PositionResidueSide chain typeRole in the sequence
1ThrPolar, hydroxylatedN-terminus, start of the tuftsin segment
2LysBasicPositive charge at neutral pH
3ProCyclic imino acidTurn-promoting, resists many peptidases
4ArgBasic, guanidiniumPositive charge; end of the tuftsin segment
5ProCyclic imino acidStart of the added tail
6GlySmallest residueFlexibility between prolines
7ProCyclic imino acidC-terminus

The Selank product page lists this sequence together with the formula C33H57N11O9, a 10 mg size and ≥98% HPLC purity. Two basic residues (Lys and Arg) give the peptide a net positive charge in typical buffers, which is relevant to solubility and to adsorption on glass or plastic.

The tuftsin core

Tuftsin (Thr-Lys-Pro-Arg) was described by Najjar and Nishioka in 1970 as a natural phagocytosis-stimulating peptide.[1] Selank keeps this sequence intact at its N-terminus and adds a Pro-Gly-Pro tripeptide at the C-terminus. The design logic usually given for the extension is stability: free tuftsin is a short peptide that is broken down quickly, and a proline-containing tail is expected to slow exopeptidase attack. That rationale is a design hypothesis from the peptide-chemistry literature rather than something established here by measurement, so a laboratory that depends on it should test stability in its own medium.

How the tuftsin lineage shaped the research directions is covered in what is Selank peptide and the Selank research overview.

Composition and mass

PropertyValueSource
Residues7Sequence above
Molecular formulaC33H57N11O9Product page
Average molecular weightAbout 751.9 g/molCalculated from the formula
Proline content3 of 7 residuesSequence above
Cysteine residues0Sequence above
Net charge at neutral pHPositive (Lys, Arg; free N-terminus)Reasoned from side chains

The average mass is the sum of the atomic masses of the formula (33 C, 57 H, 11 N, 9 O), which gives about 751.9. Mass spectrometry reports monoisotopic ions, so an observed [M+H]+ is expected a little above 751 and should be compared with a calculated value, not with the average mass, when confirming identity. A mass match supports composition but cannot distinguish a sequence isomer such as a swapped Pro-Arg order, which is why sequence confirmation is a separate check.

Why prolines matter for the structure

A proline's side chain closes onto the backbone nitrogen, which removes the amide hydrogen and restricts the backbone angle. Peptide bonds preceding proline can be found in cis as well as trans form, and the interconversion is slow. On an HPLC trace this sometimes shows up as a broadened or doubled peak for a proline-rich peptide even when the material is pure. A second practical point is that proline-rich short peptides tend to adopt flexible, extended conformations in water rather than a single folded one. Nothing in this article claims a particular solution structure for Selank; if one matters for an experiment it needs to be measured, for example by NMR or circular dichroism.

Synthesis and impurity profile in outline

Linear peptides of this length are normally made by solid-phase synthesis, building from the C-terminal proline toward the N-terminal threonine. Typical impurity classes for such a sequence are deletion peptides (one residue missing), truncations, incompletely deprotected material and residual counterions from cleavage and purification. Because Pro-Gly-Pro is at the C-terminal end and Thr-Lys-Pro-Arg at the other, a deletion of either a proline or the glycine gives a peptide only 97 or 57 mass units lighter, easily resolved by mass spectrometry but not always by HPLC alone. This is why identity and purity are reported as separate fields; see Selank purity testing and how to read a COA.

Selank next to tuftsin: what the extra three residues change

PropertyTuftsin (Thr-Lys-Pro-Arg)Selank (Thr-Lys-Pro-Arg-Pro-Gly-Pro)
Residues47
Proline residues13
Basic residues2 (Lys, Arg)2 (Lys, Arg)
C-terminal residueArg, with a free carboxylPro, with a free carboxyl
FormulaC21H40N8O6 (derived from the sequence)C33H57N11O9

Adding Pro-Gly-Pro leaves the charge-bearing residues unchanged while lengthening the chain and moving the C-terminus from a basic residue to a proline. For a bench chemist the consequences are practical: the ionic character that governs solubility is similar, retention on a reversed-phase column changes with the added hydrophobic surface, and the mass rises by the three added residues (Pro 97, Gly 57 and Pro 97 mass units, about 251 in total). Whether those changes alter biological activity is a question for the experiments cited in the Selank research overview, not for a structural table.

Reading a structure-based identity check step by step

A reliable identity check has four layers. Layer one is the intact mass: the observed [M+H]+ should sit within the instrument's stated tolerance of the calculated monoisotopic value for C33H57N11O9. Layer two is fragmentation: tandem mass spectrometry produces b and y ions whose spacing reads out the sequence, and a proline-rich peptide typically breaks preferentially on the N-terminal side of proline, so expect strong fragments at the Lys-Pro and Arg-Pro bonds, and weaker information around the Pro-Gly-Pro end. Layer three is amino-acid analysis, which confirms the ratio of residues (here 3 Pro, 1 Thr, 1 Lys, 1 Arg and 1 Gly) but not their order. Layer four is retention behavior on a reversed-phase column compared with a reference standard. A certificate that reports only a purity percentage covers layer four at most, which is why the COA fields listed on the product page include identity and sequence confirmation as their own items.

Storage logic that follows from the structure

Selank has no cysteine, tryptophan or methionine, so it lacks the residues most prone to oxidation, and it has no side-chain amide residues (Asn, Gln) that deamidate readily. Its main vulnerabilities are therefore physical rather than chemical: adsorption to surfaces at low concentration, microbial growth in unpreserved aqueous stock, and hydrolysis during long storage in solution. Those points favor keeping the lyophilized powder at the product page's stated tier, reconstituting only what a session needs, and keeping dilute working solutions for as short a time as the experiment allows. Step-by-step reasoning on reconstitution is in how to reconstitute a lyophilized peptide.

What a laboratory should confirm

  • Sequence identity matches Thr-Lys-Pro-Arg-Pro-Gly-Pro.
  • Mass matches the calculated value for the formula within instrument tolerance.
  • HPLC purity matches the stated ≥98%, with attention to peak shape given the prolines.
  • Lot number and test date are recorded; compare with the COA library where a lot is published.
  • Net peptide content is considered when a molar claim is made, because counterions and water add mass; use the calculator with the formula weight of about 752 g/mol.

Handling summary and research-use statement

Per the product page the material is a lyophilized powder in a sealed clear glass vial, stored refrigerated at 2-8 °C, or at −20 °C for long-term, away from heat, moisture and light. The pathway studies in which Selank has been used are summarized in the Selank research overview. All material discussed here is supplied for laboratory research use only; not for human or animal consumption, and not a drug, food or cosmetic.

Related reading

Frequently asked questions

What is the Selank sequence?

Thr-Lys-Pro-Arg-Pro-Gly-Pro, a seven-residue linear peptide.

What is its molecular formula?

C33H57N11O9, as listed on the product page; the average molecular weight is about 751.9 g/mol.

What is the tuftsin part?

The first four residues, Thr-Lys-Pro-Arg, a natural phagocytosis-stimulating peptide described in 1970.[1]

What does the Pro-Gly-Pro tail do?

It is usually described as a stabilizing extension. That is a design rationale rather than a measured result in this article; test stability in your own medium.

Does Selank contain disulfide bonds?

No. It has no cysteine residues, so no disulfide bonds.

Why can a pure proline-rich peptide give a doubled HPLC peak?

Slow cis/trans isomerization around proline peptide bonds can broaden or split a peak even for pure material.

Does a mass match prove identity?

It supports composition but cannot separate sequence isomers; sequence confirmation is a separate check.

What size does V8 list for Selank?

10 mg, lyophilized powder, ≥98% HPLC purity, per the product page.

How should the vial be stored?

2-8 °C, or −20 °C for long-term, protected from heat, moisture and light.

Is Selank intended for people or animals?

No. It is supplied for laboratory research use only; not for human or animal consumption.

Related reading: Selank Mechanisms: GABA, Enkephalin and Cytokine Data.

References

  1. Najjar VA, et al. 'Tuftsin': a natural phagocytosis stimulating peptide. Nature. 1970. doi:10.1038/228672a0

Research Use Only. All products are sold strictly for laboratory research and development purposes only. Not for human or animal consumption. Not a drug, food, or cosmetic. By purchasing, you affirm you are a qualified researcher or institution.