Quick answer
What should quality control for Selank cover? Purity by HPLC with a stated method, identity by mass (calculated [M+H]+ about 752.44), and awareness that the sequence has no aromatic residues, so 280 nm UV cannot be used for concentration. Allow for counterion and water content in the 10 mg mass. The V8 page lists at least 98% by HPLC and currently marks the certificate as in progress. Supplied for laboratory research use only.
Selank is a seven-residue peptide, Thr-Lys-Pro-Arg-Pro-Gly-Pro, and that small size shapes every quality question about it. There is no disulfide to check, no long chain to truncate in a dozen ways, and no hydrophobic stretch that makes it hard to dissolve. There are also no aromatic residues, which turns out to matter for how it is detected and quantified, and there are three basic groups that attract counterions. This article works through purity standards and quality control for a short, proline-rich, hydrophilic peptide: what the V8 product page states, what an HPLC percentage means here, how identity is confirmed, and how to read documentation when it exists. It is written for laboratory researchers, it does not compare any other source, and it does not describe any use outside a laboratory.
From the Selank product page: Selank is described as a synthetic tuftsin analog whose first four residues reproduce tuftsin, with a Pro-Gly-Pro tail added to make the molecule more resistant to peptidase breakdown. The page lists molecular formula C33H57N11O9, a 10 mg lyophilized vial, purity of at least 98% by HPLC, storage at 2–8 °C or −20 °C for the long term protected from heat, moisture and light, and a certificate status currently marked as in progress. Tuftsin itself was described in 1970 as a natural phagocytosis-stimulating peptide (Najjar and Nishioka, 1970).
What the sequence predicts about analysis
Read the sequence as an analyst would. Threonine, lysine, proline, arginine, proline, glycine, proline. Three observations follow directly. First, no tryptophan, tyrosine or phenylalanine means the peptide has essentially no absorbance at 280 nm, so the common shortcut of estimating concentration by UV at 280 nm does not work; detection relies on the peptide bond in the low UV, around 210–220 nm, where many other substances also absorb. Second, the molecule has an N-terminal amine, a lysine side-chain amine and an arginine guanidinium, three positive charges at acidic pH that bind counterions. Third, three prolines make the chain conformationally restricted at several positions, and proline-containing peptides can show broadened or split peaks under some chromatographic conditions because of slow interconversion between conformers; a split peak is not automatically an impurity, which is why the method and the reference chromatogram matter.
| Property (calculated from product-page formula C33H57N11O9) | Value | Consequence for QC |
|---|---|---|
| Average molar mass | about 751.89 g/mol | Use for concentration arithmetic |
| Monoisotopic mass | about 751.43 Da | Target for high-resolution mass spectrometry |
| [M+H]+ (calculated) | about m/z 752.44 | Expected singly charged ion; multiply-charged ions also likely |
| Aromatic residues | None | No useful 280 nm signal; low-UV detection only |
| Basic sites | Three (N-terminus, Lys, Arg) | Counterion content can be substantial |
What "at least 98% by HPLC" tells you for a short peptide
For a heptapeptide the purity figure is easier to trust than for a long one, because synthesis has only seven coupling steps and the impurity families are fewer. They still exist. A review of related impurities in peptide medicines catalogues deletion peptides, truncations, incompletely deprotected products and racemized residues as products of solid-phase assembly (D'Hondt et al., 2014). For Selank the plausible neighbours are shorter chains missing one residue, the Pro-Gly-Pro tail truncated, and diastereomers from racemization at an amino acid during coupling. Deletion products of a small, hydrophilic peptide can elute very close to the target on reversed-phase columns, so a method with a shallow gradient is better evidence than a steep one.
Because the low-UV signal is not selective, small co-eluting species, solvents and scavengers can add to the area. The responsible reading of "98%" therefore asks for the method (column, gradient, mobile phase), the wavelength, the date and the lot, as for any peptide; the principles are in understanding HPLC purity and HPLC vs mass spectrometry.
Identity: why mass confirmation carries the weight
Retention time alone cannot establish that a peak is Selank. Mass spectrometry can: the calculated singly protonated mass near m/z 752.44 is distinctive for this formula, and fragmentation can confirm sequence. The product page lists sequence or identity confirmation among its documentation items without naming the method, so a laboratory that needs a specific technique should request it in writing. Proline-rich peptides fragment characteristically on the N-terminal side of proline in collision-induced dissociation, a general feature of peptide mass spectrometry that an analyst should expect to see in a good spectrum; absence of any interpretable fragmentation is a reason to ask more questions. For the closely related question of sequence proof, the library covers Selank purity testing and the product background in the Selank research overview.
Counterions, water and a hygroscopic powder
With three basic sites per molecule and a short, polar chain, Selank lyophilizate is a salt with an appreciable counterion fraction, and short polar peptides tend to take up water readily. In practice the 10 mg labelled on the vial is the mass of powder, of which peptide is a smaller share. Trifluoroacetate, a counterion common after reversed-phase purification, was reported in one study to reduce proliferation in osteoblast and chondrocyte cultures (Cornish et al., 1999), which is a reason to record the counterion for sensitive cell assays. The product page gives the stock arithmetic: 2 mL into 10 mg gives 5 mg/mL and 1 mL gives 10 mg/mL, so a 100 µL aliquot of the 5 mg/mL stock holds 500 µg of powder mass. Because UV at 280 nm cannot be used, a lab that needs exact concentration should plan amino-acid analysis or another quantitative method. The reconstitution calculator handles the nominal arithmetic, and peptide reconstitution volume calculations explains the terms. Because the powder takes up moisture, allow a cold vial to warm to room temperature before opening.
Reading the documentation, and what to do while a certificate is in progress
The product page lists the documentation items: compound identity and sequence, measured purity as an HPLC percentage, sequence or identity confirmation, batch or lot number, analytical test date, and supplied form and storage. The status line currently reads "COA in progress". For a record, the honest statement is that a purity specification exists and a lot-specific certificate had not been published when the page was read; identity and purity of a given lot should be regarded as unverified until a certificate is published or the laboratory tests the material. Published certificates are listed on the COA page, and how to read a COA explains the fields.
| Document item | Useful for Selank if… | If absent |
|---|---|---|
| Identity and sequence | Mass matches C33H57N11O9 within instrument tolerance | Run an in-house mass check |
| HPLC purity | Method, wavelength and chromatogram provided | Ask for the method; retain a sample |
| Identity confirmation | Names the technique (mass spectrometry or sequencing) | Request it in writing |
| Lot and date | Match the vial label and are recent | Do not apply another lot's data |
| Counterion / peptide content | Stated, if the lab needs exact molarity | Measure by amino-acid analysis if precision matters |
Receiving and retention routine
- Check the label against the paperwork: compound, 10 mg size, lot number.
- Inspect the vial: intact stopper and crimp, dry white cake or powder; see peptide vial appearance: what is normal.
- Store promptly: 2–8 °C, or −20 °C for the long term, away from heat, moisture and light, as the product page states.
- Warm before opening: prevent condensation on a hygroscopic powder.
- Add diluent gradually against the glass and finish with a slow swirl; shaking is unnecessary, per the product page.
- Aliquot and retain: split stock into single-use portions and keep an unopened or frozen reserve for re-testing.
For sourcing context see where to buy Selank and what is Selank.
What published Selank research does and does not tell a QC reader
Research on Selank concentrates on neurochemistry in rodent and cell models. A 2016 study measured the expression of 84 neurotransmission genes in the rat frontal cortex after administration of Selank or GABA and reported significant changes in 45 genes at one hour and 22 genes at three hours, with positive correlation between the two exposures (Volkova et al., 2016). A 2017 study in IMR-32 neuroblastoma cells found no changes in mRNA levels of the genes studied under Selank alone, while the combination with GABA suppressed GABA-induced changes (Filatova et al., 2017). The two papers used different systems and report different outcomes, which illustrates a QC point: results depend on the model, and a lab that wants to reproduce either needs well-characterized material and a documented lot. They also describe nothing about any product other than the peptide tested in each study, and this article draws no inference about the biology of any particular vial. The catalogue is on the shop page; Selank is supplied strictly for laboratory research use only.
Frequently asked questions
What does the V8 Selank product page state about quality?
A purity specification of at least 98% by HPLC, a 10 mg lyophilized vial, formula C33H57N11O9, storage at 2–8 °C or −20 °C long term, and a certificate status currently marked as in progress.
Is a certificate published for Selank?
At the time of writing the page marks the certificate as in progress. Regard identity and purity as unverified for a lot until a certificate is published or you verify the material yourself.
Why can I not measure Selank concentration at 280 nm?
The sequence Thr-Lys-Pro-Arg-Pro-Gly-Pro has no tryptophan, tyrosine or phenylalanine, so it has essentially no 280 nm absorbance. Low-UV detection or amino-acid analysis is needed.
What is the calculated mass of Selank?
From the product-page formula, about 751.89 g/mol average and 751.43 Da monoisotopic, with a singly protonated ion near m/z 752.44. These are calculated values, not lot measurements.
Can a split HPLC peak be a proline effect?
It can be. Proline-containing peptides can show broadened or split peaks from conformer interconversion, so judge a split peak against the method and a reference chromatogram before calling it an impurity.
Why does counterion content matter for a short peptide?
Three basic sites bind counterions, so a substantial share of the powder mass can be salt and water. Record the counterion for sensitive cell assays.
How do I make a 5 mg/mL stock?
Add 2 mL of diluent to the 10 mg vial, as the product page states. The calculator handles other volumes.
How should the vial be stored?
At 2–8 °C, or −20 °C for the long term, protected from heat, moisture and light; warm to room temperature before opening.
Do published Selank studies describe this product?
No. They describe the peptide tested in each study, in rodent or cell systems, and say nothing about any particular vial.
Is Selank sold for use outside the laboratory?
No. It is supplied strictly for laboratory research use only and is not intended for human or animal consumption.
Related reading: Selank Anxiolytic Peptide Research: Models and Readouts, Selank Nasal Spray Research: Intranasal Studies Explained, Selank Research Peptide: What the Evidence Shows.
References
- Najjar VA, Nishioka K. "Tuftsin": a natural phagocytosis stimulating peptide. Nature. 1970;228(5272):672-673. doi:10.1038/228672a0
- D'Hondt M, Bracke N, Taevernier L, et al. Related impurities in peptide medicines. J Pharm Biomed Anal. 2014;101:2-30. doi:10.1016/j.jpba.2014.06.012
- Cornish J, Callon KE, Lin CQ, et al. Trifluoroacetate, a contaminant in purified proteins, inhibits proliferation of osteoblasts and chondrocytes. Am J Physiol. 1999;277(5):E779-E783. doi:10.1152/ajpendo.1999.277.5.e779
- Volkova A, Shadrina M, Kolomin T, et al. Selank administration affects the expression of some genes involved in GABAergic neurotransmission. Front Pharmacol. 2016;7:31. doi:10.3389/fphar.2016.00031
- Filatova E, Shadrina M, Alieva A, et al. GABA, Selank, and olanzapine affect the expression of genes involved in GABAergic neurotransmission in IMR-32 cells. Front Pharmacol. 2017;8:89. doi:10.3389/fphar.2017.00089
